Step 3
|
Up and Down Faces At the end of this step, your cube will look like one of these two cases:
|
|
|
|
|
Start by counting the number of yellow corners. If there are fewer than 2, apply algorithm 1.
To place the corner faces, apply algorithm 2.
To place the edge faces, apply algorithm 3.
|
|
Formula 1 - Case a Fewer than 2 yellow corners
|
Formula 1 - Case b Fewer than 2 yellow corners
|
Formula 2 - Case a Move the bottom right corner up instead of the top left corner
|
Formula 2 - Case b Move the bottom right corner up instead of the top left corner
|
Formula 3 - Case a Move the bottom opposite edge up instead of the top back edge
|
Formula 3 - Case b Move the bottom opposite edge up instead of the top back edge
|
|
Step 4
|
The 3rd layer At the end of this step, your cube will look like one of these 2 cases:
|
|
|
|
|
First, place the white face up and apply algorithm 1.
To place the corners, apply algorithm 2.
To place the edges, apply algorithm 3.
|
|
Formula 1 - Case a Swap faces
|
Formula 1 - Case b Swap faces
|
Formula 2 - Case a To swap the two left corners
|
Formula 2 - Case b To swap the two left corners
|
Formula 3 - Case a To swap the face edge with the right edge
|
Formula 3 - Case b To swap the front edge with the right edge
|
|
Step 5
|
The 1st layer At the end of this step, your cube will look like one of these two cases:
|
|
|
|
|
Start by placing the yellow face up, apply algorithm 1.
To place the corners, apply algorithm 2.
To place the edges, apply algorithm 3.
|
|
Formula 1 - Case a Swap the faces
|
Formula 1 - Case b Swap the faces
|
Formula 2 - Case a To swap the two left corners
|
Formula 2 - Case b To swap the two left corners
|
Formula 3 - Case a To swap the front edge with the right edge
|
Formula 3 - Case b To swap the front edge with the right edge
|
|
Step 6
|
The central layer At the end of this step, your cube will look like this:
|
|
|
|
| If your Square One has the shape below, perform the following algorithm:
|
|