Step 4
The corners of the 2nd layer Once all the corners have been processed, your cube will look like this:
|
Place the corners - case a The algorithm will swap the corners (except the one in front of you on the right) clockwise.
Depending on your setup, you should apply the algorithm a maximum of 2 times!
The orientation of the corners can vary. What matters is the placement.
(The 3 colors of each corner must correspond to the 3 theoretical faces of the corner)
|
Place the corners - case b The algorithm will swap the corners (except the one in front of you on the left) counterclockwise.
Depending on your setup, you should apply the algorithm a maximum of 2 times!
The orientation of the corners can vary. What matters is the placement.
(The 3 colors of each corner must correspond to the 3 theoretical faces of the corner)
|
Orienting the Corners The algorithm will allow you to orient the 2 corners on your right upwards.
Depending on your setup, you should apply the algorithm a maximum of 2 times!
Remember to orient your cube correctly so as not to perform the algorithm more than necessary, i.e., not necessarily the second layer at the top.
|
|