Step 1
The first layer When the layer is completely solved, your cube will look like this:
No particular algorithm.
The placement of the pieces should remain intuitive.
Here are the main steps:
|
The centers
For the centers, you can refer to step 7.
|
Edges
|
Corners
|
|
Step 2
Edges of the 2nd layer Once all the edges have been processed, your cube will look like this:
|
Place the edges - case a
The edge to be placed is on the 4th layer
It is on the right The algorithm allows you to place it on the 2nd layer.
|
Place the edges - case b
The edge to be placed is on the 4th layer
It is opposite The algorithm allows you to place it on the 2nd layer.
|
Place the edges - case c
The edge to be placed is on the 3rd layer
It is incorrectly oriented The algorithm allows it to be moved down to the 4th layer and then placed on the 2nd layer, correctly oriented.
|
|
Step 3
The central edges of the 4th layer This step does not exist for even-dimensional cubes
|
Step 4
The corners of the 4th layer When all the corners have been processed, your cube will look like this:
|
Place the corners - case a The algorithm will swap the corners (except the one in front of you on the right) clockwise.
Depending on your setup, you should apply the algorithm a maximum of 2 times!
L'orientation des coins peut varier. Ce qui compte, c'est l'emplacement.
(Les 3 couleurs de chaque coin doivent correspondre aux 3 faces théoriques du coin)
|
Placer les coins - cas b
L'algorithme va permuter les coins (sauf celui placé devant vous à gauche) dans le sens inverse d'une aiguille d'une montre.
Selon votre configuration, vous devriez appliquer l'algorithme 2 fois maximum !!!
L'orientation des coins peut varier. Ce qui compte, c'est l'emplacement.
(Les 3 couleurs de chaque coin doivent correspondre aux 3 faces théoriques du coin)
|
Orienter les coins
L'algorithme va vous permettre d'orienter vers le haut, les 2 coins de votre droite.
Selon votre configuration, vous devriez appliquer l'algorithme 2 fois maximum !!!
Remember to orient your cube correctly to avoid running the algorithm more than necessary, i.e., not necessarily with the 4th layer on top.
|
|
Step 5
Edges of the 4th layer When all the edges have been processed, your cube will look like this:
(cube flipped over)
Note: if an edge is misplaced on the 4th layer, you will need to apply one of the two algorithms to move it to the 3rd layer.
|
Place the edges - case a To move the right edge of the 3rd layer to the left edge of the 4th layer
|
Place the edges - case b To move the left edge of the 3rd layer to the right edge of the 4th layer.
|
|
Step 6
The edges of the 3rd layer When all the edges have been processed, your cube will look like this:
|
Place the edges The algorithm allows you to swap the edges of the 3rd layer clockwise except for the bottom left edge.
In this example, the blue/orange edge of the 3rd layer will not move.
Depending on your setup, you should apply the algorithm a maximum of 2 times!!!
|
|
Step 7
The centers When all the centers have been processed, your cube will look like this:
Be clever!!!
Avoid leaving a color on the opposite side, otherwise you'll have to repeat the algorithm twice!
Try, as much as possible, to place two colors each time.
|
Place the centers Row of rank 1 / Column of rank 1
|
|
Step 7 bis
The last centers When all the centers have been processed, your cube will look like this:
|
Place the centers - case a
|
Place the centers - case b
|
|